Audio-Technica M3 Configuración Y Funcionamiento página 11

How to select a frequency
Note: Select a unique frequency for each M3T Stereo Transmitter in
use. Any number of M3R Stereo Receivers can be set to the same
frequency (as that of their associated transmitter) and
receive the same mix.
Note: On the M3R Stereo Receiver, the "Set" button has the same
function as does the "Mode/Set" button on the M3T StereoTransmitter.
1. If you choose to manually select a frequency, use the FREQ
menu on the LCD window of the M3T Stereo Transmitter and
M3R Stereo Receiver.
FREQ touch
EDIT
Hold
Touch
Hold
STORED
mode without making any changes, touch the Mode/Set (or
Set) button. "ESCAPE" appears briefly in the display, and the
unit returns to Menu mode.
2. Instead of manually selecting a frequency, you may select a
frequency group and channel (Group 1 – Channel 1 through
Group 6 – Channel 16) via the GROUP menu on the LCD window
of the M3T Stereo Transmitter and M3R Stereo Receiver.
GROUP
EDIT
Touch
Note: To escape from Edit mode without
making any changes, touch the Mode/Set (or Set) button.
"ESCAPE" appears briefly in the display, and the unit returns
to Menu mode.
Note: All channels within a given group are compatible. If you
are using multiple transmitters, set each transmitter to a different
channel within the same group.
Touch
Note: To escape from Edit
touch
Hold
STORED
3. In the event that the preprogrammed frequency groups (available
under the Group menu) do not meet your requirements,
Audio-Technica allows you to program custom frequency
groups as follows:
Hold
Hold
STORED
4. On the M3R Stereo Receiver, you also have the choice of using
the Automatic Frequency Scanning function to select a
frequency, as follows:
SCAN
MENU
EDIT
STORED
PROG
Hold
Hold
touch
SCAN
press and hold
press
ESCAPE
Menu
EN