THOMSON dSc - 725S Manual De Instrucciones página 43

OutdOOr 1080p Ip WI-FI camera
To program an alert to be sent when motion is
detected, you need 2 email addresses: the address
of the sender which will be used by the camera,
and the address which will receive the alerts. The
camera uses the username and password of the
sender address to connect and send the email.
Configuration depends on the chosen email
provider's settings.
Note: the 2 email addresses can be the same (you
will simply be sending an email to yourself)
In our example, we use www.gmail.com:
sender-address@gmail.com sends the alerts,
recipient@gmail.com receives the alerts. Both
addresses need to have been created beforehand.
To program email alerts for motion detection, right
click on a camera in the list at the top right of the
main screen or on the screen image, then select
"Paramètres caméra
Then go to "Réseau [Network]", "Paramètres
messagerie [Message settings]":
[Camera settings]".
1 2 3 4 5 6
7 8 9
d - CONFigurATiON ANd uSE
Tick the "Activer [enable]" box to enable
1
email sending
SMTP server: varies with the email provider
2
of the address sending the alert. In our
example, using Gmail, smtp.gmail.com
SMTP port: varies with the email provider of
3
the address sending the alert. I our example
using Gmail, 465
Security: security when connected to the email
4
provider. In our example using Gmail, TLS
Authentication: indicates whether
5
connection is compulsory (authentication) to
send an email. In our example using gmail:
Yes (in other words: you cannot send an
email via Gmail if you are not logged into your
account).
SMTP user name: Name that you have to
6
enter to log into the email box which will send
the alerts. In our example using Gmail, this
is the sender address: sender-address@
gmail.com
SMTP password: The password used to log
7
in to sender-address@gmail.com, in our
example
Sender: enter the new address used to send
8
the alerts: sender-address@gmail.com.
Click on "Test" to check that your settings
are correct and that the camera is able to
connect to the email account you entered for
sending the alerts.
Recipient, etc.: Use this space to enter the
9
address(es) which will receive the alerts. In
our example: addressee@gmail.com
IMPORTANT: When you have finished configuration,
do not forget to click on "Save" to save everything
you have entered.
Important note: it does not matter who the email
provider of the addressee or addressees is as it is
the email provider of the sender which dictates what
needs to be entered. However, you must ensure you
check that the alerts are not treated as spam by any
of the addressees.
When you have finished configuring your camera,
it will be able to send emails. You must now tell
it when to send them, by clicking "Détection de
mouvement [Motion detection]":
en
17