Ingersoll Rand 235G Manual Del Usuario página 3

Ingersoll-Rand No. 50
Always use an air line lubricator with these tools.
We recommend the following Filter-Regulator-Lubricator
(FRL) Unit:
Model Handle Drive
2
I.D. Type in
235G pistol 1/2"
Tested in accordance with ANSI S5.1-1971 at free speed
■
♦
Tested to ISO8662-1 loaded with frictionbrake to 9 RPM
•
Tested in accordance with ISO3744
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and the parts be separated by material so that they can be recycled.
LUBRICATION
INSTALLATION
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
Emergency L
Shut-Off
Valve
Lubricator Regulator
Drain Regularly
SPECIFICATIONS
Impacts Recommended
Torque Range
bpm ft•lbs (N•m)
25 to 200
1,200
(34 to 271)
NOTICE
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
Inside USA use FRL unit #C28-04-FKG0-28
Outside USA use FRL unit #C28-C4-FKG0
After each eight hours of operation, unless the air line
lubricator is used, detach the air hose an inject about 1-1/
2 cc of oil into the Inlet Bushing (14).
After each forty-eight hours of operation, or as experi-
ence indicates, remove the Oil Chamber Plug (48) and fill
the impact mechanism oil chamber with the recom-
mended oil.
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
R
F
Filter
FRL
Compressor
(Dwg. TPD905-2)
♦
Sound Level Vibrations
■
dB (A) Level
Pressure • Power
m/s
90.7 103.7
3
Inlet Minimum
Connection Inside Ø
(Thread) (Air Hose)
2
NPT inch (mm)
3.8 1/4 3/8 (10)