Storage; Transportation; Locating Malfunctions; Instructions To Order Spare Parts - Enarco TORNADO GH Manual De Instrucciones

4.3 STORAGE

Always store the screed in a clean and dry area when not used for a long period of time.

4.4 TRANSPORTATION

Make sure the screed won't suffer any ripping or shock that could cause any damage.
5

LOCATING MALFUNCTIONS

The motor doesn't work
The screed doesn't vibrate
The electric motor is overheating
en
6

INSTRUCTIONS TO ORDER SPARE PARTS

6.1 INSTRUCTIONS TO ORDER SPARE PARTS
1.- Every spare parts order must include PART CODE NUMBER AS STATED IN THE PARTS
LIST. We recommend including the MACHINE SERIAL NUMBER.
2.- The identification plate with serial and model number is located in the plate of the vibrating
assembly (QX and TORNADO), in the handle support (QZ) and in the frame (Huracan). In electric
screeds the identification plate is located in the motor plate and in the motor housing.
3.- Let us to know the right shipping instructions, including the wished route, the address and the
consignee complete name.
4.- Do not return the parts without authorisation, the return is done with freight prepaid.

6.2 INSTRUCTIONS TO REQUEST WARRANTIES

1.- The warranty is valid for 1 year after the purchasing of the machine, the warranty will cover parts
with manufacturing defects. In any case the warranty will cover a malfunction due to improper usage
of the equipment. The customer will always pay labour and shipping fees.
2.- In all warranty requests THE MACHINE MUST BE SENT TO ENARCO, S.A. or to an
AUTHORIZED DEALER, always including the complete address and name of the consignee.
3.- The Technical Assistance Service will immediately notify to the customer if the warranty is
accepted and, if requested, it will send a technical report.+
4.- The warranty will be void if any equipment has been previously handled by personnel outside of
ENARCO, S.A. or not authorized by it.
ENARCO, S.A., reserves the right to modify any part of this manual without prior notice.
NB:
.
VIBRATING AND OSCILATING VIBRATING SCREEDS WITH ELECTRIC OR PETROL ENGINE HANDYFLOATS TYPE
8
PROBLEM CAUSES/SOLUTIONS
Check the gas level.
Check the gas admission key is open.
Check the de choke position (gas).
Check the power source (electric).
Check the brushes condition (electric Turbo)
Check the cables, the switch and the plug (electric).
Check the engine oil level.
Check the exciter's transmission.
Clean the air ventilation (inlet and outlet).
Check the power supply type.