Using Macros; Example - Programming A Favorite Channel - Universal Electronics ATLAS XL Guia Del Usuario

USING MACROS

With programming, the MACRO key on your Atlas XL
Universal Remote Control can be setup to perform
repetitive, time-consuming operations through the press
of a single key.
A macro can be used to control a home theater operation,
to set a favorite channel, or for other multiple functions
you would like to control with one key press (see the
example below). Moreover, the MACRO key can hold up to
three macros with up to 15 key presses each. The macros
are then activated, in the order they were stored, each
time you press this key.
NOTE: If three macros are stored, programming a new macro will
erase the first original macro. Thereafter, each new macro will
overwrite the next original macro.
Example – Programming A Favorite Channel
With so many channels available through your cable
provider, you can program a macro that directly selects a
favorite channel with one key press.
For example, let's assume your favorite cable programs
are on channel 71. Use the following instructions to pro-
gram a macro for direct access of this channel:
1.
2.
3.
4.
5.
6.
Now when you press MACRO, you will instantly see the
cable converter tune to channel 71.
On the remote control, press CBL once.
Then press and hold SETUP until the
CBL key blinks twice, then release SETUP.
Enter 9 - 9 - 5. The CBL key will blink twice.
Press MACRO once.
Press CBL once.
Enter the channel number, 7 - 1.
NOTE: If you have access to over 100 channels,
enter 0 -7 -1. Moreover, if the original remote control
required pressing an Enter key to change the channel,
also press the ENTER key after the channel number
(e.g., 0 -7 -1 - ENTER).
Press and hold SETUP until the CBL key blinks
twice, then release SETUP.
16