Auto-Perfilado - Metcal Scorpion Guia Del Usuario

Auto-perfilado

•Una herramienta usada para ayudar a la creación de perfiles
térmicos.
•Un termopar disparador es usado para controlar las acciones del
Scorpion.
Ejemplo de PCBoard
• Place a K type thermcouple (TC) under the component part.
• 36 gauge TC with component stand-off heights > .5mm
• 40 gauge TC with component stand-off height of <.5mm
• Place the board into the board holder.
• Lower the reflow head into position over the component
• Connect the K type thermocouple to TC1
• Hover the cursor over the Auto-profile icon.
• Left click once for a lead-free Auto-profile .
• Left click twice for a lead Auto-profile.
• Left click three times to turn off Auto-profile
.
.
30