Digital Card And Usb Play - Brandt DVDP9x2E1L Manual De Instrucciones

You can repeatedly press PROGRAM on the remote to select the
desired slide show mode.
Still Picture:
1. Press during slide show. The player will now go into PAUSE
mode.
2. To return to the slide show, press
Zoom:
1. Press ZOOM on the remote.
2. Press or
3. When the picture is enlarged, press
4. Press ZOOM again to exit.
To rotate a picture:
Press during play to rotate the picture clockwise or
counter clockwise or have an invert or mirror picture.

DIGITAL CARD AND USB PLAY

Digital cards (SD/MMC card) and USB with mp3&pictures (.JPEG) may
be played and displayed through the unit. The USB port can be used to
supply signals to the unit from USB sources.
1. Switch the unit on.
2. Insert a USB device into the USB port or a card into the card reader
slot on the side of the unit.
3. Press SOURCE
4. Press to highlight "USB". Press ENTER.
OR
Press to highlight "USB" and press
ENTER.
5. If USB/CARD is selected, the unit will begin to read the card or USB
connected to it.
repeatedly to zoom in and out.
and then press
EN-19
again.
to pan through it.
to highlight "Media".
to highlight "CARD". Press