Setting The Ride Time - VDO MC 2.0 WL Manual De Instalación Y Operación

6.9 Setting the ride time

The total ride time can be separately set for bike 1 and bike 2. Before
the start of the season, you can reset the total ride time to zero.
ATTENTION: the total ride time is SAVED when the battery is
changed. The data is not lost.
Process:
Press and hold M for three seconds. SETTInGS--OPEn? flashes.
LAnGUAGE---SELECT---appears on the display.
Press P to scroll to rIDE TIME ---SET---.
Press M in confirmation.
rIDE TIME--TIME BIKE 1 or TIME BIKE 2 is shown on
the display.
Press ALTI A
Press M in confirmation.
TIME BIKE 1--SET HOUrS appears on the display.
The hours flash.
Press ALTI
A
it. Once you have set the correct value, press
confirm your setting.
or P to make a selection.
to reduce the value or to increase
P
TIME BIKE 1--SET MInUTES appears on the display.
The minutes flash.
Press ALTI
it. Once you have set the correct value, press
confirm your setting.
TIME BIKE 1--SET OK?
Press
The MC 2.0 confirms by displaying TIME BIKE 1--SET DOnE.
To exit settings mode, press and hold the
SETTInGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
M to
www.vdocyclecomputing.com
PL NL ES IT
A to reduce the value or P
in confirmation.
M
C button for three seconds.
FR ENG DE
to increase
M to
MC 2.0 WL 67