CLEANING
WARNING: To reduce the risk of electric shock,
disconnect from power supply before cleaning.
Aluminum mesh filters: Clean frequently using hot water and a
mild detergent. Clean all-metal filters in the dishwasher using a
non-phosphate detergent. Discoloration of the filter may occur if
using phosphate detergent or as a result of local water conditions
- but this will not affect filter performance. This discoloration is not
covered by the warranty.
Charcoal filters: Clean filter surfaces frequently with a damp cloth
and a mild detergent. DO NOT immerse filters in water or put in dish-
washer. The special "Clean Sense" feature indicates when the filter
is to be replaced. The dotted lines on the indicator strip will change
to wide solid lines when it is time to change the filter. The "Clean
Sense" feature works best when facing toward the cooking surface.
To clean hood: Remove filters. Use a damp cloth and a mild deter-
gent to wipe all grease-laden surfaces. Use care when cleaning fan
blade - it must not become bent or misaligned. DO NOT ALLOW
WATER TO ENTER MOTOR. Make sure all surfaces are completely
dry before re-installing filters and restoring power.
Motor is permanently lubricated. Do not oil or disassemble motor.
NON-DUCTED FILTERS
If hood is to be installed Non-Ducted:
Purchase a set of (2) non-ducted filters from your local distributor or
retailer and attach them to the aluminum mesh filters.
SERVICE PARTS
KEY NO. PART NO.
1
R680508
7" Round Duct Plate (includes hardware)
Damper/Duct Connector (includes hardware)
2
R740013
3
R602017
Screw, #8-18 x ¼ Hex* (2 in package)
4
99091152 Nameplate
5
R602534
Screw, 8-18 x 3/8* (2 in package)
6
R602533
Ground Screw (2 req.)
7
98010725 Wiring Cover (includes hardware)
8
*
Rivet, Pop .125 dia.
9
R169016
Filter Spring Kit
10
R169002
Motor Mounting Screw (3 each part)
11
R99080535 Motor (includes Motor Mounting Kit)
12
R401647
Air Chute Assembly
(includes Key No. 15 & hardware)
13
R401646
Baffle
14
R531075
Fan Blade (Includes hairpin clip)
**
R99420635 Hairpin Clip
15
99010361 Filter Kit (2 per bag)
16
R111630
Lamp Socket Harness
17
R720174
Light Panel
18
R501031
Isolation Transformer
19
97018343 Auto Transformer (includes hardware)
20
97018344 Control Assembly
(includes Key No. 4 & hardware)
21
99091149 Medallion
**
99271422 Wire Harness
**
99010308 Non-Ducted Filter Kit (2 per bag)
**
R564074
Control Fuse, 10A
Order replacement parts by PART NO. - not by KEY NO.
* Standard hardware - may be purchased locally.
** Not illustrated.
Replacement parts can now be ordered on our website.
Please visit us at www.NuTone.com
DESCRIPTION
3
1
4
20
13
12
5
15
WARRANTY
BROAN-NUTONE ONE YEAR LIMITED WARRANTY
Broan-NuTone warrants to the original consumer purchaser of its products that such products
will be free from defects in materials or workmanship for a period of one year from the date of
original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUD-
ING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
During this one-year period, Broan-NuTone will, at its option, repair or replace, without charge,
any product or part which is found to be defective under normal use and service.
THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES, HALO-
GEN AND INCANDESCENT BULBS, FUSES, FILTERS, DUCTS, ROOF CAPS, WALL CAPS AND
OTHER ACCESSORIES FOR DUCTING. This warranty does not cover (a) normal maintenance
and service or (b) any products or parts which have been subject to misuse, negligence, ac-
cident, improper maintenance or repair (other than by Broan-NuTone), faulty installation or
installation contrary to recommended installation instructions.
The duration of any implied warranty is limited to the one-year period as specified for the
express warranty. Some states do not allow limitation on how long an implied warranty lasts,
so the above limitation may not apply to you.
BROAN-NUTONE'S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE'S OPTION,
SHALL BE THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY.
BROAN-NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE.
Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary
from state to state. This warranty supersedes all prior warranties.
To qualify for warranty service, you must (a) notify Broan-NuTone at the address or telephone
number below, (b) give the model number and part identification and (c) describe the nature
of any defect in the product or part. At the time of requesting warranty service, you must
present evidence of the original purchase date.
Broan-NuTone LLC, 926 W. State Street, Hartford, Wisconsin 53027
www.nutone.com 888-336-3948
ALLURE™ WS15 SERIES
RANGE HOOD
3
18
21
5
8
6
11
9
10
14
17
Page 6
2
19
7
3
16
5
99044624C