Knight DosaMAX Jr. Serie Manual De Instrucciones página 3

INSTALLATION : DOSAMAX OVER THE SINK
1.) Slide discharge tube through
cover
4.) Slide discharge tubing through
hole on dispenser arm
INSTALLATION : DOSAMAX BUCKET FILL
1.)
Run discharge tube through base
and dispenser arm.
4.) Snap dispenser arm onto
bucket arm base. Run discharge
tube through base and dispenser
arm. Cut discharge tube to appro-
priate length.
S100322 Rev: (REL)
2.) Align cover, making sure the
green ready indicator is aligned
with opening and chemical suction
tube is aligned with tab opening.
5.) Snap dispenser arm onto
DosaMAX Jr. base
2.) Align cover, making sure the
green ready indicator is aligned
with opening and chemical suction
tube is aligned with tab opening.
5.) Insert check valve into
discharge tube with blue O-ring
side going in first. Then insert
nozzle into discharge tube.
3.) Screw at the bottom and top of
cover to reattach cover.
6.) Snap nozzle and tubing onto
underside of dispenser arm
3.) Screw at the bottom and top of
cover to reattach cover. Place
bucket arm base in place, and
screw in three screws in shown areas
to mount bucket arm base to wall.
6.) Snap nozzle and tubing onto
underside of dispenser arm
Page 3 of 16