RS Pro RS-9880 Manual Del Usuario página 4

Particle Counter/ English
7. Particle Counter easurement ode
Press ENTER to begin in particle counter mode, which will measure and
display temperature and humidity.
Press the RUN/STOP button to start detection of particles. When the
sample time is complete, the particle measurement will stop and save
the data automatically. You can also press the RUN/ STOP button to stop
the measurement at any time. This mode also allows the user to take
pictures and videos.
7-1 Take Picture Function
In particle counter mode, see the
Press F1 to enter camera mode. Take pictures using the F2 button. Press the "ESC" button to exit.
7-2 Take Video Function
In particle counter mode, see the
Press F2 to enter video mode. Press the "RUN/STOP" button to start the measurement and the LCD
display will show . Press the F2 button to begin the video and again to stop. The
file will be saved automatically. Press the "ESC" button to exit.
7-3.Particle Setup Mode
In particle counter mode, see the
respective F1, F2, and F3 buttons. Press F3 to enter setup mode. In this
mode, use the or to select and set up specific parameters. Press
enter to confirm.
7-3-1 Sample Time
To adjust the sample time or size, use the or
the time/ size of the desired measurement. It can be set to
60s/2.83L.
7-3-2.Start Delay
To adjust the start time, use the or . The maximum
delay is 100 seconds.
4
icon, and respective F1, F2, and F3 buttons.
icon, and respective F1, F2, and F3 buttons.
icon, and
to set
07/12/2017 Version No. 001
7-3-3 Channel Display
Please see the image below for the channel display. Use the
or to select the desired channel. Choose one channel at
least. Press ENTER to confirm.
7-3-4 Ambient Temp/%RH
Choose ENABLE to display the air temperature and humidity.
7-3-5. Sample Cycle
Use the sample cycle option to set the sampling period.
7-3-6.Sample Mode
Set the particle counter display mode:
Selecting the cumulative icon will show the particle
counter measuring interface, indicating the unit work in
cumulative mode;
Selecting the differential icon will show the particle
counter measuring interface, indicating the unit will workgin
differential mode.
Selecting the concentration icon will show the particle
counter measuring interface, indicating the unit work in
concentration mode.
7-3-7. Interval
Use the interval to set the time between samples. The
maximum interval is 100 seconds.
07/12/2017 Version No. 001
Particle Counter/ English
5