Descargar Imprimir esta página

Hotpoint Ariston MC1LH Instrucciones De Uso página 15

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
Installation & Working
Installation
MC1LH
MC1LP
Before inserting the single lever group in the hole of
the sink, make sure that the base gasket is properly
positioned in its seat and that the flexible hoses are
well tightened to the body of the tap. Place the single
lever group in the hole of the sink, orienting the spout
toward the sink basin.
Insert the fixing kit with the indicated sequence, and
respectively: the shaped flange, the plastic triangular
flange and the flange. ONLY if the thickness of the
bearing surface does not allow installing all fastening
components, is it possible not to use the triangular
plastic flange.
Tighten well the tie rod or the threaded nut. Proceed
connecting the flexible hoses to the plumbing.
(Fig. 1-3)
MC1LSH
MC1LSHP
Before inserting the single lever group in the hole of
the sink, make sure that the base gasket is properly
positioned in its seat and that the flexible hoses are
well tightened to the body of the tap. Place the single
lever group in the hole of the sink, orienting the spout
toward the sink basin.
Insert the fixing kit with the indicated sequence, and
respectively: the shaped flange, the plastic triangular
flange and the flange. ONLY if the thickness of the
bearing surface does not allow installing all fastening
components, is it possible not to use the triangular
plastic flange.
Tighten well the tie rod or the threaded nut.
Connect the flexible hose to the outlet pipe interposing
the gasket.
Fix the lead counterweight to the flexible hose at a
distance of approx. 400 mm from the connection to the
outlet pipe.
Tighten the shower to the hose interposing the gasket
and confirm the hose can slide smoothly through the
passage hole.
Proceed connecting the flexible hoses to the plumbing.
(Fig. 1-5)
Working
Open the handle to the right to start water supply; the
more the handle is opened the more water is supplied.
When idle the handle is placed with the lever towards
the top and when opened cold water is supplied. To
get mixed water and hot water turn progressively the
handle to the bottom.
(Fig. 6-7)
EN
15

Publicidad

loading

Este manual también es adecuado para:

Mc1lpMc1lshMc1lshp