Sony SDM-HS75P Guía De Instalación Rápida página 7

Specifications
LCD panel Panel type: a-Si TFT Active Matrix
Picture size:
SDM-HS75P: 17.0 inch
SDM-HS95P: 19.0 inch
Input signal format
RGB operating frequency*
Horizontal:
28–80 kHz (analog RGB)
28–64 kHz (digital RGB)
Vertical:
48–75 Hz (analog RGB)
60 Hz (digital RGB)
Resolution Horizontal: Max.1280 dots
Vertical:
Input signal levels
Analog RGB video signal:
0.7 Vp-p, 75 Ω, positive
SYNC signal:
TTL level, 2.2 kΩ,
positive or negative
(Separate horizontal and
vertical)
Digital RGB (DVI) signal: TMDS
(Single link)
Power requirements
100–240 V, 50–60 Hz, Max. 1.0 A
Power consumption
SDM-HS75P: Max. 45 W
SDM-HS95P: Max. 60 W
Operating temperature
5–35°C
Dimensions (width/height/depth)
Display (upright):
SDM-HS75P
Approx. 388 × 382.5 × 139.2
mm
1
/
(15
4
SDM-HS95P
Approx. 435 × 418 × 146 mm
1
(17 /
8
Mass SDM-HS75P: Approx. 5 kg
3
(11 lb.
SDM-HS95P: Approx. 6 kg
(13 lb. 3
Plug & Play DDC2B
Included itemsSee "Setup."
* Recommended horizontal and vertical timing
condition
Max.1024 lines
× 15 × 5
1
/ inches)
2
× 16 × 5
1 3
/ / inches)
2 4
/ oz.)
8
5
/ oz.)
8
• Horizontal sync width duty should be more
than 4.8% of total horizontal time or 0.8
µsec, whichever is larger.
• Horizontal blanking width should be more
than 2.5 µsec.
• Vertical blanking width should be more than
450 µsec.
Design and specifications are subject to change
without notice.
US
7
(US)