Liemke KEILER–25 LRF Manual De Instrucciones página 65

> A white cross cursor will appear on the display.
> A 2x magnified image of the cross cursor area
(PIP) will appear on the lower-left corner of the
display that is required to facilitate a search
for the defective pixel and to align the marker
with it.
> A tooltip will appear at the bottom of the
display, which displays the current number of
defective pixels calibrated, the moving direc-
tion (horizontal
arrows) and the position of the cursor.
> The horizontal and vertical directional arrows
indicate to move the cursor with the coordi-
nates along the X and Y axes.
> A short press of the Menu button (5) switches
the cursor direction from the horizontal to the
vertical and vice versa. The icon and text will
be changed from white to blue when this
direction is activated.
> Use the Up (4) / Down (3) buttons to move the
cursor to align its center with the defective
pixel. And with short press to move 1 pixel and
long press to move 10 pixels each time.
> After the cursor aligns with the defective pixel,
delete the defective pixel with a short press of
the Power button (6).
> Then, by moving the cursor across the display,
you can delete the next defective pixel.
> Short press the Power button (6) again in the
same position to undo the calibration.
KEILER – 25 LRF · Operating Manual 11 / 2020
and vertical
directional
E
N
28
–
29