Publicidad
INTRODUCTION
Thank you for purchasing this pallet truck
SURTEK.
Your Transmission Jack is made of high qual-
ity steel and was designed to give you a dura-
ble, reliable and easy to use product. For your
safety
and corrected operation.
NOTE: AII of the information reported herein
is based on data available at the moment of
printing.
We reserve the right to modify its own prod-
ucts at any moment without notice and incur-
ring in any sanction. So, it is suggested to al-
ways, verify possible updates.
FORWARD
This jack is a removal hydraulic ones. It with the
following advantage compact construction,
light in weight, long lift range, fast in lift, ag-
ible and stable in removing, centre of the load
adjustable and safe and reliable etc.
It can be used when assembling and disassem-
bling the removal parts,structal parts, which
need lifted,descended transported. It' s the
ideal tool for assembling and repairing in mo-
tor repair shop, mobile garage.
CAUTION
1. For safety, the load can not beyond the rated
capacity 0,5 t.
2. The centre of the load should be same as the
centre of the Transmission Jack.
3. After putting the load on it, use safety chain.
4. When lifting load, and need work under it,
must use the safety stand.
5. There must be enough hydraulic oil in the
cylinder, the cylinder operate regularIy.
6. When remove the transmission jack, the sad-
dle must be at the lowest position.
7. Keep the removal parts oiled, to avoid rust-
ed.
FEATURE
a) Fast in lift long lift range.
b) Light in weight.
c) Saddle adjustable.
SPECIFICATION
CAPACITY: 500 kg
MINIMUM HEIGHT OF SADDLE: 20 cm
MAXIMUN HEIGHT OF SADDLE: 75 cm
NET WEIGHT: 60kg
DIMENSIONS: 85 x 49 x26 cm
CONSTRUCCIÓN PRINCIPAL/
MAIN CONSTRUCTION
4
3
2
1. Cilindro / Cylinder
2. Soporte de ruedas / Wheel stand
3. Émbolo / Ram
4. Base / Saddle
1
3
Publicidad
