Stand-Alone Configuration Mode - Oki LD630T Guia Del Usuario

5-2 Stand-alone Configuration Mode

Various modes can be executed using buttons and LED only.
5-2-1 How to start stand-alone configuration mode
• The printer mode is set to Printer Setting Mode when the Pause button is depressed
for two seconds while in Print Standby Mode.
• Both LEDs will change to orange color and the printer will be set to Stand-alone
Configuration Mode.
• When the printer enters into this mode, the status of Status LED and Error LED
are changed sequentially.
• When the Feed button is depressed at specific LED color combination, the
corresponding printer operation will be selected.
5-2-2 List of supported functions
Sequence Status LED
number
Color
1
2 Green
3
4
5 Orange
6
7
8 Red
9
Error LED
Status Color
Green
On Orange
Red
Green
On Orange
Red
Green
On Orange
Red
Status
Blink four times Print Configuration Info.
Blink four times Print File List
Blink four times Factory Reset
Blink four times Gap Sensor Auto Calibration
Blink four times B/M Sensor Auto Calibration
Blink four times Data Dump Mode
Blink four times Demo Mode
Blink four times -
Blink four times Object Delete
- 25 -
LD630T/LD640T
Printer operation