Getting Started - Rotex RKRTWA Manual De Operación

3. Getting started

3.1. Setting the clock and date
After installation you first need to set the clock before you can
actually use the thermostat.
1 Activate the advanced mode by pressing
seconds in OFF mode (
Refer also to "Description of the function modes and menus"
on page 7.
2 Navigate to the date and clock setting menu (
and then press
3 Set the hour, minutes, day of the week (
+
= Tuesday,...), day, month and year by pressing

and confirm each time by pressing
The value that you modify flashes.
3.2. Setting the desired mode: heating or cooling
This is only possible if cooling mode is available.
NOTE
1 Press to go to comfort mode (
2 Press during 5 seconds to go to the heating/cooling
selection mode.
3 Press or
1 2
or
4 Press to save your selection.
The thermostat returns to the schedule timer mode (
Operation manual
5
&
).
.
to switch to the desired mode.
is flashing.
)
) by pressing
.
#
).
Room thermostat
4PW56104-1
during 5
= Monday,
or
$
).
RKRTWA