I.SOUND DreamTime Pro Guía De Usuario página 4

Please read and follow this user guide thoroughly before
using the DreamTime Pro.
The unit uses a backup ba ery system to ensure your alarm
still sounds in the event of a power failure. Two "AA" ba eries
(sold separately) must be inserted into the ba ery compart-
ment to enable backup memory. In the event of power
outages or if the DC cord is accidentally disconnected, the LCD
display will not illuminate, but the current time and alarm
se ings will be temporarily maintained. As soon as the power
supply returns, the LCD display will indicate the correct time.
Power
Plug the AC adapter into the DC IN port on the back of the unit.
Plug the other end into a wall socket.
Se ing the clock
1. Choose 12H or 24H format on slide switch located on the
back of unit.
2. Press the
digit will begin ashing. Press
displayed. Remember to set the correct AM or PM when you
choose 12 H format for clock display. An icon in the upper le of
the time display is the PM indicator. There is no AM indicator.
3. Press
digits will begin ashing. Press
minutes are displayed.
4. Press it again to set the year. Year digits will begin ashing,
Press and
5. Press it again to set months. Month digits will begin ashing,
Press and
6. Press it again to set the day. The day digits will begin
ashing, Press
7. Press it again to exit the clock se ing mode, or a er 3
bu on located on the top of unit. The hour
bu on again to set the minutes. The minute
until the year is correct.
until the correct month is displayed.
and until the correct day is displayed.
and until the correct hour is
and until the correct