Logan L-A846-ND Manual De Instrucciones página 56

Step 2：Disconnect ADSL dial-up
1. Click【disconnect】
4.4.1.3 3G card dial-up
Function position：Network| Network setting|PPPoE
Function introduction： 3G card dial-up
Step 1：3G card dial-up
1. Click【setting】
2. Write card number/account/password
Please take 5.2 3G card dial-up for reference for
4. Click【connect】
Note: After successful dial-up, it can dial-up automatically after restart DVR or outage.
Step 2：Disconnect 3G network card dial-up
1. Click【disconnected】 。
4.4.1.4 DHCP gets IP automatically
Function position：Network| network setting
Function introduction：DHCP gets IP automatically in LAN
Open DHCP steps：
1. Confirm route to open DHCP, that can be used normally
2. Choose" Automatic IP（DHCP）"；
3. Click【Apply】or【ok】 It can get IP automatically
Note: when using DHCP function, it can not make manual IP etc parameters setting
4.4.1.5 Manual setting IP
Function position：Network| network setting
Function introduction：Manual setting IP in LAN.
User Manual
number/account/password setting
56/183