PROCEDURE
C
W
Remove
the backing
from the 13" shim strips
and attach
them
as shown
below
in Fig. 21.
The higher
portion
of shim is to be placed
in
front of the rib on the base of wall sleeve.
h'0h E--' 'I'"0h
FIG. 20
FIG. 21
_r_
Install
the new unit into the wall sleeve
_"_To
assemble
trim, snap the tab of each piece
into the slot of the other piece as shown
below.
Slide
trim over the front of the air conditioner
until trim is flush with sleeve
as shown
below.
Trim (2 ea)
Wall
FIG. 22
[!_
[_f_,_liI [.] _I
• Air conditioners covered in this manual pose
an excessive weight hazard. Two or more
people are needed to move and install the unit.
To prevent injury or strain, use proper lifting
and carrying techniques when moving unit.
• When handling the air conditioner, be careful
to avoid cuts from sharp metal fins on front and
rear coils.
• Make sure air conditioner does not fall during
removal.
-11-