Maintenance Instructions; Assembling And Disassembling - Desoutter ERAL Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12
Other clamping areas useful as
secondary clamping. Do not use these
areas for torque reaction. Extra clamping
force and stress can lower performance
and liability.
Clamping on the motor shall be selected
as last option with extra care.

MAINTENANCE INSTRUCTIONS

Regular inspection of the mains cable must be
carried out and if damaged it must be replaced.
Maintenance should be performed by qualified
personnel only.
● Prior to any maintenance task: disconnect
the tool.
● When disassembling / reassembling the tool,
take the following precautions:
- check that the controller is switched off,
- disconnect the cable.
● To avoid damaging the tool during
disassembly, use the recommended tools.
● When disassembling the handle, be careful
not to pull on the electric wires that are
connected to the motor.
● Any repair on the motor shall be carried out
in our workshops.
When disposing of components,
lubricants, etc ... ensure that the
relevant safety procedures are carried
out.

ASSEMBLING AND DISASSEMBLING

Follow standard engineering practices and
refer to figure for the mounting of component
subassemblies.
According to Directive 2012/19/
CE concerning Waste Electrical and
Electronic Equipment (WEEE), this
product must be recycled.
● Contact your Desoutter
representative or consult the website
"www. desouttertools.com" to find out
where you can recycle this product.
01/2019
DESOUTTER WARRANTY
1. This Desoutter product is warranted against
defective workmanship or materials, for a
maximum period of 12 months following
the date of purchase from Desoutter or its
agents, provided that its usage is limited to
single shift operation throughout that period.
If the usage rate exceeds that of single
shift operation, the warranty period shall be
reduced on a prorata basis.
2. If, during the warranty period, the product
appears to be defective in workmanship or
materials, it should be returned to Desoutter
or its agents, together with a short description
of the alleged defect. Desoutter shall, at its
sole discretion, arrange to repair or replace
free of charge such items as are deemed
faulty by reason of defective workmanship or
materials.
3. This warranty ceases to apply to products
which have been abused, misused or
modified, or which have been repaired using
other than genuine Desoutter spare parts
or by someone other than Desoutter or its
authorized service agents.
4. Should Desoutter incur any expense
correcting a defect resulting from abuse,
misuse, accidental damage or unauthorized
modification, they will require that such
expense shall be defrayed in full.
5. Desoutter accepts no claim for labour or
other expenditure made upon defective
products.
6. Any direct, incidental or consequential
damages whatsoever arising from any defect
are expressly excluded.
7. This warranty is given in lieu of all other
warranties, or conditions, expressed or
implied, as to the quality, merchantability or
fitness for any particular purpose.
8. No one, whether an agent, servant or
employee of Desoutter, is authorized to add
to or modify the terms of this limited warranty
in any way.
6159935760
Issue no: 13
Series: -
9 / 60

Publicidad

Tabla de contenido
loading

Tabla de contenido