GB
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further develop-
ment without notice. All dimensions, refer-
ences and information in this instruction
manual are therefore not guaranteed. Legal
claims made on the basis of the instruction
manual can therefore not be considered as
valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure as-
sessment.
. Warning:
The vibration emission value may
differ during actual use of the power
tool from the stated value depending
on the manner in which the power
tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and
times when the tool is turned on but
is running idle).
24
Notes on Safety
This section details the basic safety instruc-
tions for working with the appliance.
Symbols
Symbols.in.the.manual
. Warning.symbols.with.in-
formation.on.damage.and.
injury.prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
Symbols.on.the.Equipment
Caution!
Read through the instruction manual
carefully.
Wear eye and ear protection.
Do not use the hedge trimmer in the
rain or on wet hedges.
Information of the acoustic power
L
WA
level L
in dB.
dB
WA
Machines are not to be place with
domestic waste.
Cutting length
Cutting capacity