Product Description And Specifications - Bosch GWS 9-115 Professional Manual Original

OBJ_BUCH-3250-002.book Page 31 Friday, January 26, 2018 12:01 PM
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
Technical Data
Angle Grinder
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Speed preselection
Restarting Protection
Weight according to EPTA-Procedure 01:2014
– with vibration-damping auxiliary handle
– with standard-auxiliary handle
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Bosch Power Tools
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Spindle lock button
2 On/Off switch
3 Thumbwheel for speed preselection
(GWS 9-115 S/GWS 9-125 S)
4 Auxiliary handle (insulated gripping surface)
5 Combination spanner for M 14 grinder spindle*
6 Grinder spindle
7 Release lever for protection guard
8 Protection guard for grinding
9 Mounting flange with O-ring
10 Grinding wheel*
11 Clamping nut
12 Carbide grinding head*
13 Protection guard for cutting*
14 Cutting disc*
15 Rubber sanding plate*
16 Sanding sheet*
17 Round nut*
18 Cup brush*
19 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
GWS 9-115 GWS 9-115 GWS 9-115 S GWS 9-115 S
3 601 C96 0.. 3 601 C96 0.. 3 601 C96 1.. 3 601 C96 1..
W 900
W 450
-1
min 11000 11000
-1
min –
mm 115
M 14
mm 22
–
–
kg 2.0
kg 1.9
/II
English | 31
900 900
450 450
11000 11000
– 2800 – 11000 2800 – 11000
115 115
5/8" M 14
22 22

–

–
2.0 2.0
1.9 1.9
/II /II
1 609 92A 3FZ | (26.1.18)
900
450
115
5/8"
22


2.0
1.9
/II