Weller WD 1 Manual De Instrucciones página 28

12-16
Setting the temperature offset
The real soldering-tip temperature can be adapted by entering a
temperature offset around ± 40 °C (± 72 °F).
1. Select the menu item OFFSET in Menu 1.
2. Set the Auto-OFFSET temperature value with the UP or DOWN
button.
3. Press the I (back) or II (forwards) button to switch to the next
menu item.
Setting the window function
It is possible, starting from a set, locked temperature, to set a
temperature window of ± 99 °C (± 180 °F) with the aid of the
WINDOW function.
Note To be able to use the WINDOW function, ensure that the soldering
station is in the locked state (see "Switching the lock function
on/off").
1. Select the menu item WINDOW in Menu 1.
2. Set the WINDOW temperature value with the UP or DOWN
button.
3. Press the I (back) or II (forwards) button to switch to the next
menu item.
Switching the temperature unit
Switching the temperature unit from °C to °F or vice versa.
1. Select the menu item °C / °F in Menu 1.
2. Set the temperature unit with the UP or DOWN button.
3. Press the I (back) or II (forwards) button to switch to the next
menu item.
Switching the lock function on/off
Once the lock is activated, only the temperature buttons I, II and III
can be used on the soldering station. All other settings are disabled
until the repair station is unlocked again.
Lock the soldering station:
1. Select the menu item LOCK in Menu 1.
"OFF" appears in the display. The padlock symbol flashes.
Note Pressing the buttons I or II while "OFF" is displayed results in the
menu item being exited without a stored lock code.
2. Set a 3-digit lock code with the UP or DOWN button.
3. Press and hold button III for 5 s.
The code is stored. The padlock symbol is displayed. The station
is now locked. The display switches to the main menu.
WD 1 (M) / WD 1000