Receiving Audio Stream Via Transmitter - Audio Service microConnect Set Manual De Instrucciones

26

RECEIVING AUDIO STREAM VIA TRANSMITTER

P
Transmitter
USING THE TRANSMITTER
TV
USING THE TRANSMITTER
Connect the transmitter with the power plug to a power supply
or charge it regularly.
Use one of the supplied cables to connect the transmitter to an
external device (refer to graphic on previous page).
Press on/off switch to turn the transmitter on. The LED on the
transmitter flashes blue while searching a connection to your
microConnect.
Use the supplied adhesive tape to affix the transmitter at a
suitable place.
Press for about 3 seconds to turn the microConnect on.
Press on microConnect to change to the audio source
manually (refer to table "Changing the audio source" in chapter
„Basic function").
flashes while your microConnect is searching for a connec-
tion and it shines constantly if a connection is established. The
LED on the transmitter shines blue if a connection is established.
When connecting via Bluetooth, the switch-over time can be up
to 15 seconds.
Each time you press your microConnect switches to the next
available audio source according to table „Changing the audio
source" in chapter „Basic functions".
27