Siemens MCS Belt Manual Del Usuario página 16

3. Position the weigh beams so that the center of the scale idler is centered between
the adjacent approach and retreat idlers.
Ensure that the scale is centered and square to the stringers.
belt
travel
belt
travel
A3
approach idlers
4. Mark the position of the weigh beams and make new mounting holes suited for M12
or ½" bolts. (Refer to
5. Place the scale on the conveyor stringers with the arrows on the weigh blocks
pointing in the direction of belt travel (retreat idlers). Mount the modified idler onto
the scale using the idler clamping brackets.
Page 14 Milltronics MCS Belt Scale – INSTRUCTION MANUAL
n
A2 A1
Outline Dimensions
idler
clamping
brackets
n
R1 R2
retreat idlers
location of removed idler
on page 7.)
R3
7ML19985HN63