Section
Audio Adjustments
06
Using balance adjustment
You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press
AUDIO
Press
until
AUDIO
• If the balance setting has been previously
adjusted,
will be displayed.
Bal
2 Press 5 or ∞ to adjust front/rear speaker
balance.
Each press of 5 or ∞ moves the front/rear
speaker balance towards the front or the rear.
•
–
Fad F15
Fad R15
speaker balance moves from front to rear.
•
is the proper setting when only two
Fad 0
speakers are used.
• When the rear output setting is
cannot adjust front/rear speaker balance. Refer
to Switching the rear output setting on page 32.
3 Press 2 or 3 to adjust left/right speaker
balance.
When you press 2 or 3,
press of 2 or 3 moves the left/right speaker
balance towards the left or the right.
•
–
Bal L9
Bal R9
speaker balance moves from left to right.
26
En
to select
.
Fad
appears in the display.
Fad
is displayed as the front/rear
FRT+SW
is displayed. Each
Bal 0
is displayed as the left/right
Using the equalizer
The graphic equalizer lets you adjust the equal-
ization to match car interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves:
Display
SUPER BASS
POWERFUL
NATURAL
VOCAL
, you
CUSTOM1,2
FLAT
•
CUSTOM1
izer curve.
• A separate
for each source. (The Built-in CD player and
Multi-CD player are set to the same Equalizer
Curve Adjustment setting automatically.)
• If you make adjustments when a curve other
than
CUSTOM2
settings are memorized in
• A
CUSTOM2
all sources.
• If you make adjustments when the
curve is selected, the
updated.
• When
FLAT
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between
equalizer curve.
Equalizer curve
Super bass
Powerful
Natural
Vocal
Custom1,2
Flat
and
are adjusted equal-
CUSTOM2
curve can be created
CUSTOM1
is selected, the equalizer curve
CUSTOM1
curve can be created common to
curve is
CUSTOM2
is selected no supplement or
FLAT
06
.
CUSTOM2
and a set