Milltronics Mcs Belt Scale; The Manual - Siemens milltronics MCS Manual Del Usuario

Milltronics MCS Belt Scale

The Milltronics MCS belt scale is a compact, rugged belt scale with stainless steel load
cells for use in mobile crushers and aggregate screening plants.
The MCS belt scale includes:
• a left and a right weigh beam, with one load cell each
• calibration weight arm that mounts to the customer's weighing idler
The addition of an idler (supplied and installed by the customer) completes the weighing
assembly. The MCS load cells generate an electrical signal proportional to load, which is
fed to the Siemens Milltronics belt scale integrator.
Note:
The MCS belt scale is an accurate and repeatable force sensor. Its
performance is ultimately dependent on the conveyor system, the quality of the
installation, and the accuracy of the alignment.

The Manual

This instruction manual covers the installation, operation and maintenance of the MCS
belt scale.
We strongly recommend that you read this manual before installing and starting up any
component of the weighing system to which the MCS is being applied. Adhering to the
installation and operating procedures ensures a quick, trouble-free installation and
allows for the maximum accuracy and reliability of your weighing system.
This manual covers only MCS installation and operating procedures. Integrator and
speed sensor instruction manuals are available for download from
www.siemens-milltronics.com.
We always welcome suggestions and comments about manual content, design, and
accessibility.
Please direct your comments to techpubs@siemens-milltronics.com.
7ML19985HN61
calibration
weight
arm
MCS Belt Scale – INSTRUCTION MANUAL
optional
junction
box
Page 1