English; Safety Notes; Product Description And Specifications; Technical Data - Bosch AL 1115 CV Manual Original

OBJ_BUCH-750-002.book Page 6 Tuesday, June 7, 2011 8:33 AM

6 | English

English

Safety Notes

Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
Only charge Bosch lithium ion batteries or batteries in-
stalled in Bosch products with the voltages listed in the
technical data. Otherwise there is danger of fire and ex-
plosion.
Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
Do not operate the battery charger on easily inflamma-
ble surfaces (e. g., paper, textiles, etc.) or surround-
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
In case of damage and improper use of the battery, va-
pours may be emitted. Provide for fresh air and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Supervise children. This will ensure that children do not
play with the charger.
Children or persons that owing to their physical, senso-
ry or mental limitations or to their lack of experience or
knowledge, are not capable of securely operating the
charger, may only use this charger under supervision
or after having been instructed by a responsible per-
son. Otherwise, there is danger of operating errors and in-
juries.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and Specifica-
tions
Read all safety warnings and
all instructions. Failure to
follow the warnings and in-
structions may result in elec-
tric shock, fire and/or serious
injury.
1 619 929 J43 | (7.6.11)
Save these instructions.
Use the battery charger only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
Product Features
The numbering of the product features refers to the illustra-
tion of the battery charger on the graphics page.
1 Battery*
2 Green battery charge indicator
3 Charging compartment
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Battery Charger
Article number
Output voltage (automatic voltage
detection)
Charging current
Allowable charging temperature
range
Charging time for battery capacity,
approx.
– 1.3 Ah
Number of battery cells
Weight according to EPTA-Procedure
01/2003
Protection class
Please observe the article number on the type plate of your battery
charger. The trade names of individual battery chargers may vary.
Operation
Starting Operation
Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
Charging Procedure
The charging procedure starts as soon as the mains plug of
the battery charger is plugged into the socket outlet and the
battery 1 is inserted into the charging compartment 3.
Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery is
charged with the optimum charging current, depending on
battery temperature and voltage.
This gives longer life to the battery and always leaves it fully
charged when kept in the charger for storage.
Note: The charging procedure is only possible when the bat-
tery temperature is within the allowable charging tempera-
ture range, see Section "Technical Data".
AL 1115 CV
2 607 225 5..
V 3.6 – 10.8
mA 1500
°C 0 – 45
min 55
1 – 3
kg 0.3
/ II
Bosch Power Tools