Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Programming
TYPE 1
Chamberlain, Sears Craftsman, LiftMaster,
Master Mechanic and Do It garage door
openers or receivers with:
3 position
DIP switches.
1
Select and write a 4-digit PIN:
__ __ __ __
2
Determine your opener ID using the list below.
ID
DIP Switch Type
11
9 DIP switch garage door openers (U.S.)
12
9 DIP switch garage door openers (Canada)
15
8 DIP switch garage door openers
19
7 DIP switch garage door openers
3
The first DIP switch must be set to the "-" position on your remote and
opener. Record your DIP switch sequence for remaining DIP switches. If
the DIP switch is in the "+" position place a 1, "0" position place a 2, "-"
position place a 3 in the corresponding box in the chart below:
NOTE: Leave any unused switch locations blank.
DIP Switch
1
2
3
4
5
6
7
Sequence
+
0
-
3
Opener
Remote Control
8
9
4
Press and hold the
*
and
stops flashing.
5
Enter
PIN
from step 1, press #.
6
Enter
ID
from step 2, press #.
7
Enter
DIP
switch sequence from step
3 and press
#
key.
8
To test and use, wait until
lights turn off, enter your
and press the
0
key.
If opener does not function, repeat programming.
3
#
buttons until keypad
PIN
Publicidad
Capítulos
Tabla de contenido
