Operator Guidelines For Safer Material Handling - Cooper Tools Campbell GXL Manual Del Operador

Operating Guidelines for
Safer Material Handling
1. The Number One Guideline for Safe Material Handling
is to STAY CLEAR OF THE LOAD WHEN LIFTING! The oper-
ator should stand clear of load and should never lift over
people or machinery.
2. Know the application. Before using any Campbell
clamp, refer to the application section of this manual to be
sure the lift to be made is appropriate for this style clamp.
3. Determine the weight of the load.
Every Campbell clamp has its rated
weight capacity and grip range forged
or stamped into the body. Always use
a clamp with a grip and lifting capacity
in excess of the thickness and weight
of the plate or member being lifted.
Match the clamp to the load. Don't use a big clamp lift a
small load.
4. Inspect clamp before each lift. Refer to the maintenance
and inspection pages of this manual for details.
a. Check the cam and pad for excessive wear. If one of
the gripping components is approaching the
maximum allowable wear, it is recommended that both
the cam or pad be replaced. Always ensure that the
teeth of the cam and pad are not clogged with dirt
and/or foreign material.
b. Check the shackle and visible linkage to be sure they
are not bent or excessively worn. If so, replace them.
WARNING:
ponent. Replace it. Do not use any clamp in need of repair, or
that has been overloaded.
5. Use only the manufacturer's recommended
replacement parts.
Do not try to straighten any bent com-
5