Honeywell SONIK Guia De Inicio Rapido página 8

Mode with Colour
Bluetooth
connected
Fault Yellow
Inhibit Yellow
Warning Yellow
Normal Blue
Normal Blue
Alarm Red
Over-range Red
Connecting Blue
Connected Blue
mA Loop Status Signaling
Mode Default Value (mA)
Discrete Mode
Fault
Inhibit
Warning
Normal 4
Pre-alarm 16
Alarm 20
Over-range
Periodic Proof Test
Searchzone Sonik functionality can be verified using the Searchzone Sonik Test Unit (optional) in
combination with the Mobile App.
CAUTION
While operating the Searchzone Sonik Test Tool, ultrasound is generated. Do NOT aim the tool towards
your or anyone else's body or head.
The Searchzone Sonik Test Unit generates two different test signals to check detector's functionality:
1) the first test signal is recognized by detector as a gas leak. It is reported through change in detector's
LED ring status indicator. The test is automatically logged.
2) the second test signal is used for end-to-end testing. It is reported through detector's LED ring status
indicator, Relays and through 4-20 mA loop to indicate alarm condition. The test is automatically logged.
Refer to Maintenance section of Technical Manual for instructions on how to perform LOCAL and END-
to-END test using the Searchzone Sonik Test Unit.
Refer to Mobile App section of Technical Manual for instructions on how to access proof test readings.
You can download Technical Manual from www.honeywellanalytics.com
Flashing
Yes
No
Yes
No
Yes
Yes
Yes
Yes
No
Min Value (mA)
Proportional Mode
1 0
2 1
3 1
Proportional to sound 4
pressure level
Not available 4
Not available 4
21 20
Default Scheme
Default
Default
Default
Default
Optional
Default
Default
Default
Default
Max Value (mA)
3.6
3.6
4
20
20
20
22
8