Trouble Shooting; Specification And Accessories - APOZA BT Cool EASY Manual De Utilización

6. TROUBLE SHOOTING

Users could simply handle the following status. For any other unlisted fault, please
contact the dealer immediately for further check. Any self-repairing might raise worse
condition and severe damage or injury.
FAULT
"H5" shown on the
display.
LCD has no display.

7. SPECIFICATION and ACCESSORIES

1》 SPECIFICATION
LIGHT SOURCE
SPECTRUM
SWITCHING POWER SUPPLY
ARM LENGTH
HEIGHT
WEIGHT
NOTE:
1. Best operation transportation and storage, environment at:
Temperature
Humidity
2. Disconnect power cord plug to fully turn off the equipment.
2》 ACCESSORIES
CONTROL BOX WITH ARM+STEM+STAND
SWITCHING POWER SUPPLY
PROTECTION GLASSES
DISTANCE GUIDE
POSSIBLE CAUSE
Power supply is not
correct.
1. Power supply is
not properly
connected.
2. Fuse overloaded.
: Blue LED
: 430 ~ 490nm
INPUT : AC 100
OUTPUT : DC 5V, 3A
: 90cm
: 120cm
: 4.2 kgs (net)
o o
: 0 C ~ 40 C
: 30% ~ 90%.
7
SOLUTION
Use correct power supply with output
DC 5V.
1. Make sure the electric power
socket, power supply, and the
power cable are properly
connected.
2. Remove the electric power.
Re-connect with the electric
power after 2 minutes.
- 240V, 50/60Hz
V.4: 20090723-EN