WEG SSW-07 Guia De Instalacion página 4

Remote Keypad and RS-485 Modbus RTU Kit
NOTE!
The terminal strip point identified by the symbol
through module circuitry. A direct connection of this point to the ground would be
advisable in order to improve the electric conductivity of the grounding. The
shows the RS-485 connections.
NOTE!
The Remote Keypad does only work together with the Remote Keypad Interface and
the appropriated cable.
This optional module does only work with SSW-07/SSW-08 V1.44 software version
or greater.
NOTE!
For more information refer to the Serial Communication manual.
The keypad parameter programming must be done according to the SSW-07/SSW-08
parameter programming manual that is available on the CD that comes with the
soft-starter or at WEG website (www.weg.net).
The Remote Keypad dimensions are shown in the
6 SSW-07 / SSW-08
58 mm
(2.28 in)
Figure 1: Remote Keypad external dimensions
is already grounded internally
figures 1 and 2.
18.2 mm
(0.71 in)
16 mm
(0.62 in)
3 mm
(0.12 in)
22 mm
(0.86 in)
figure 3