Garmin ecoRoute Manual Del Usuario página 4

• The OBD II connector is often
below the steering column, between
the center console and the driver's
door.
• The OBD II connector might be
under a labeled cover. Remove
or open the cover to access the
connector.
• The OBD II connector might be
under or behind the ash tray or
near the power outlet in the center
console.
Connecting and Mounting
the ecoRoute HD Device
WARnInG
‹
When installing the device in a vehicle,
install the device securely so it does
not interfere with the vehicle operating
controls, such as the foot pedals, or
the driver's feet. Interference with the
vehicle operating controls or feet can
result in an accident, which could result
in injury or death.
Defer to your vehicle's warranty
provisions and owner's instructions
for guidance on whether any OBD II
connector product might void or alter
your vehicle's warranty. Garmin is not
responsible for any costs or expenses
associated with vehicle repairs or
voided warranties.
If you notice any change in engine
performance after connecting
the device, disconnect the device
immediately and contact Garmin's
customer service department. Do
not use the device if it affects engine
performance or acceleration in your
particular make and model of vehicle.
The permanent mounting adhesive is
extremely difficult to remove after it is
installed.
Before installing the ecoRoute HD
device, you must update the GPS device
software and find the OBD II connector
in your vehicle.
4
CAUtIOn
‹
Notice