Removing/Installing Shoulder Belt Guide; Storage Drawer - Harmony TRANSIT DELUXE Manual De Instrucciones

! All straps MUST be tight and NOT twisted. ALL slack
MUST be removed from lap and shoulder portions
of the vehicle belt to ensure a snug fit. THE LAP BELT
PORTION MUST PASS UNDER BOTH ARMRESTS AND
BE POSITIONED LOW ON THE HIPS.
TO REMOVE:
1. Remove vehicle seat belt from RED belt guide clip.
2. Gently pull upwards on the belt and plastic button
until removed.
It is recommended to store the unused shoulder belt
guide along with any other parts from the booster seat
for future use.
TO INSTALL:
1. Insert plastic button into the end of the belt guide.
2. With LIGHT force, gently press the button into the
hole on the underside of the seat base.
! OPENING OF RED BELT GUIDE CLIP MUST FACE
FORWARD.
This booster seat is equipped with a storage drawer.
TO OPEN: Press RED button.
TO CLOSE: Push until locked into place.
21
REMOVING/INSTALLING
SHOULDER BELT GUIDE

STORAGE DRAWER