Maintenance / Care; Declaration Of Conformity - Ce - Würth ICSS300-PEVO Manual De Instrucciones

Maintenance / Care

- Before any work on the device, pull the mains plug 1.
- For safe and proper working, always keep the device
clean.
- When finished using the device, pull off the pad 16 or
marking felt 27 from the insert.
- Clean the insert with water.
- In case of long period of device inactivity, please,
remove the tube for chemical solution 11 from the torch
10. If possible, wash the inside pump circuit using the
tube filled with water.
If the machine should fail despite the care taken in
manufacturing and testing, repair should be carried out by a
Würth Master-Service agent.
Warranty
For this Würth tool, we provide a warranty in accordance
with statutory/country-specific regulations from the date of
purchase (proof of purchase by invoice or delivery note).
Damage that has occurred will be corrected by replacement
or repair.
Damage caused by normal wear, overloading or improper
handling is excluded from the warranty.
Claims can be recognised only when the tool is presented
undisassembled to a Würth branch office or a Würth field
service employee.
Disposal
Power tools, accessories and packaging should be sorted for
environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household
waste!
According to
2002/96/EC on waste electrical and electronic equipment
and its incorporation into national law, power tools that are
no longer suitable for use must be separately collected and
sent for recovery in an environmental-friendly manner.
the European Directive

Declaration of Conformity - CE

We declare under our sole responsibility that this product is
in conformity with the following standards or standardization
documents: EMC 2014/30/EU
Electromagnetic Compatibility; LVD 2014/35/EU Directive
Low Voltage; 2011/65/EU RoHS Directive.
Fdo. Sandra Salvat
a
Dir . de Productos y Calidad
Fdo. Valentin Casajuana
Dir. de Compras.
Directives on the
17