Air Intake Connection; Electrical Connections - Palazzetti SPHERA IDRO Manual De Instalación, Uso Y Mantenimiento

- 6.3a -
INSTALLATION
6.6

AIR INTAKE CONNECTION

It is necessary to provide an external air intake to
The dimensions of the hole must comply with the values
set forth in the table of technical data shown in the
"Product booklet".
According to local standards in force, air intake could be
taken directly from the room (- 6.3a -) or connected to
the stove (- 6.3b -).
Is forbidden the intake of air for combustion from
The combustion air intake should be protected by
an anti-insect grille and placed where it can not be
accidentally obstructed, and made in such a way that the
useful cross-section allows the right amount of oxygen
to reach the stove.
In the room where the stove is located, if there are one
- 6.2 -
or more extraction fans (exhaust hoods and the like),
there may be problems with combustion due to lack of
combustion air.
6.7

ELECTRICAL CONNECTIONS

On the front of the stove there is a compartment that
houses the probe of the control unit (connected to
the probe of the thermostatic valve for combustion air
control).
6.7.1 Installing the digital control unit (optional)
For installation and set-up please refer to the instructions
attached to the optional digital control unit.
- 6.3b -
(-6.2-).
.