Publicidad
Idiomas disponibles
Idiomas disponibles
[PCConnection]
This unit is equipped
with a PC input jack, If you connect
this unit to your PC, you can use this unit as a computer
monitor.
e.g.)
VGA cable should be
rear of this unit
with ferrite core.
VGA cable
mini-plug
audio cable
personal computer
Note:
• Pleasepurchase the VGAcable that has a ferrite core.
[]Attaching
a Wall Mount
Bracket
(sold separately)
Thefollowingisa description ofthe methodforattaching a wall mountto thisunit,
Whenperforming thisoperation, r efertothe instruction manualincluded with thewall mountkit.
You need the following wall mount kit for this unit
Flat panel TV wall mount
Modelnumber: V MPL
For more information,
please visit SANUSSYSTEMS website at www.sanUSoCOm
* ,_l_,and,(2_indicate
the position
of the screw holes on this unit.
rear of this unit
-'_
stand shafts
1
Spread a thick and soft cloth over a table. Place the
main unit face clown onto it. Make sure not to damage
the screen. At least two people are required at this step.
Note:
• Make sure to use a table which can support the weight of
this unit and is larger than this unit.
• Make sure the table is in a stable location.
EN
2
Remove the stand shafts from this unit.
Unscrew the M5 screws indicated
by 0_ and remove
the
stand shafts. Please be careful with the unit after you
remove
the stand shafts.
No te:
• The M5 screws and stand shafts you have removed are
necessary for reattachment at a later date. Make sure to
keep them in a safe place.
Attach the monitor
brackets to this unit using the
M6 screws included
with the wall mount
kit.
No te:
• Only use the screw holes indicated by _ for mounting this
unit.
• For instructions on how to attach the monitor plate, refer
to the instruction manual included with the wall mount kit.
Attach this unit to the wall. At least two people are
required at this step.
No te:
• Refer to the instruction manual included with the wall
mount kit when securing this unit to the wall.
Publicidad
