WELDY miniwelder geo2 Instrucciones De Funcionamiento página 11

Application miniwelder geo2
Application miniwelder tex1/tex2
tex1
tex2
Application miniwelder roof2
Note: For welding materials made of PVC the miniwelder with
a steel wedge must be used.
Intended use:
The miniwelder geo2 is designed for overlap welding of thinner
geo membranes made from: LDPE, HDPE, PP, PVC, EVA.
Any use other than or beyond that described above is deemed
non-intended.
Areas of use:
Civil engineering, landfills, expressways, water-proofing
works, reservoirs, artificial lake and pond construction,
production of covers, fish farms, agriculture, biogas reta-
ining bags, etc.
Note: For welding materials made of PVC the miniwelder tex2
with a steel wedge must be used.
Intended use:
The miniwelder tex2 is designed for overlap welding of mate-
rials made from textiles and coated textiles and thinner syn-
thetics from 100 microns up (tex 1: 50 microns) made from
PE, PP, PVC, EVA.
Any use other than or beyond that described above is deemed
non-intended.
Areas of use:
Production of sealing barriers and covers in agriculture, ponds,
greenhouses, tarpaulins, architecture.
Note: For welding materials like thermoplastic sub-roof mem-
branes (PVC and TPO), the miniwelder with a steel wedge must
be used.
Intended use:
The miniwelder roof2 is designed for overlap welding close to
the edge of thin sub-roof membranes made from: PVC, TPO/
FPO, thermoplastic EPDM.
Any use other than or beyond that described above is deemed
non-intended.
Areas of use:
Pitched roofs, slightly sloped roofs, assembling of membranes
for indoor applications.
11