Power Outlet En; Using An Ac Adaptor; Turning Power On Or Off; Auto Power Off - Casio CGP-700 Guia Del Usuario

Power Outlet
Your Digital Piano runs on standard household power.
Be sure to turn off power whenever you are not using
the Digital Piano.

Using an AC Adaptor

Use only the AC adaptor (JEITA Standard, with unified
polarity plug) that comes with this Digital Piano. Use
of a different type of AC adaptor can cause
malfunction of the Digital Piano.
Specified AC Adaptor: AD-E24250LW
• Use the supplied power cord to connect the AC
adaptor as shown in the illustration below.
DC 24V terminal
Note the following important precautions to avoid
damage to the power cord.
During Use
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or
connector.
During Movement
• Before moving the Digital Piano, be sure to unplug
the AC adaptor from the power outlet.
During Storage
• Loop and bundle the power cord, but never wind it
around the AC adaptor.
• Never connect the AC adaptor (JEITA Standard,
with unified polarity plug) that comes with this Digital
Piano to any other device besides this Digital Piano.
Doing so creates the risk of malfunction.
• Make sure the Digital Piano is turned off before
plugging in or unplugging the AC adaptor.
• The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
• Use the AC adaptor so its label surface is pointed
downwards. The AC adaptor becomes prone to
emitting electromagnetic waves when the label
surface is facing upwards.
B
Household power outlet
Power cord
AC adaptor
• Configuration and type depends
on your geographic location.

Turning Power On or Off

1.
Press the 1 P button to turn on power.
• Do not touch the keyboard, pedals, or buttons while
the startup screen is on the display. Doing so will
cause malfunction.
• Use the Digital Piano's VOLUME controller (2) to
adjust the volume.
2.
To turn off the Digital Piano, hold down the
1 P button until the Digital Piano's display
goes blank.
• The message shown below may appear while data is
being saved to Digital Piano memory or immediately
after you turn on the Digital Piano.
Never turn off Digital Piano power while this
message is displayed.
• Pressing the 1 P button to turn off power actually
puts the Digital Piano into a standby state. Minute
amounts of current continue to flow within the
Digital Piano in the standby state. If you do not plan
to use the Digital Piano for a long time or if there is a
lightning storm in your area, be sure to unplug the
AC adaptor from the power outlet.

Auto Power Off

This Digital Piano is designed to turn off automatically
to avoid wasting power after no operation is
performed for a preset amount of time. The Auto
Power Off trigger time is about four hours.
• You can disable Auto Power Off, if you want. For
details, see "Auto Power Off" under "SYSTEM
SETTING Screen" (page EN-45).
EN-7