Intellinet 561174 Guía De Instrucciones Rápida página 2

5-Port Gigabit PoE+ Switch with SFP Combo Port
This guide presents the basic steps to set up and operate this device. For detailed
instructions and specifications, refer to the user manual enclosed with this product or at
intellinetnetwork.com.
Placement
Prior to use, place/position the switch:
• On a level surface that can support the weight of the switch (and any other items that
need to be considered);
• With a minimum of 25 mm (approx. 1") of clearance on the top and sides
for adequate ventilation;
• Away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• Where it cannot be affected by excessive moisture.
Connections
All ports on the switch support Auto-MDI/MDI-X functionality, so you can use straight or
crossover UTP/STP cables to connect the RJ45 ports to PCs, routers, hubs, other switches,
etc.
LED Status
PWR
On
Off
1 - 5
On
Blinking
Off
PoE On
Off
PoE Limit
On
Uplink
On
Blinking
Off
SFP
On
• The LED indicators make monitoring and troubleshooting easier. If a status LED
doesn't indicate a link or activity, check the corresponding device for proper setup and
operation.
• Use the included power adapter (54 VDC) to connect the receptacle on the back of the
switch to a power outlet, and confirm that the Power LED lights.
2 English
Operation
Power On
Check connection; turn power on
Valid port connection
Data transmitted/received
No link established
Port is linked to PSE/PoE device
No PSE/PoE device is linked
Power draw of connected PoE devices exceeds available PoE budget
Valid port connection on port 5
Valid port connection; data transmitted/received
No link established
SFP module inserted, link established
English