Operating Your Snow Thrower; Operating Controls; Operation - Craftsman 247.88190 Manual De Instrucciones

Drive Control
Electric Start Button
Chute Assembly
Oil Fill
Clean Out
Tool
Augers

Operating Controls

(See Figure 1)
WARNING: Read, understand, and follow all
instructions and warnings on the machine
and in this manual before operating.
Shift Lever
The shift lever is located between the lower handles. Place the shift
lever into any of eight positions to control the direction of travel and
ground speed.
Forward
There are six forward (F) speeds. Position one (1) is the slowest and
position six (6) is the fastest.
Reverse
There are two reverse (R) speeds. One (1) is the slower and two (2) is
the faster.

OPERATING YOUR SNOW THROWER

Gas Cap
Skid Shoe
Shift Lever
Auger Control
Chute Directional Control
Ignition
Key
Choke
Control
Throttle
Control
Figure 1
Choke Control
The choke control is found on the rear of the engine and is activated
by rotating the knob clockwise. Activating the choke control closes the
choke plate on the carburetor and aids in starting the engine.
Throttle Control
The throttle control is located on the engine. It
regulates the speed of the engine and will shut off the
engine when pushed down completely.
Primer
Depressing the primer forces fuel directly into the
engine's carburetor to aid in cold-weather starting.

Engine Controls
Recoil Starter
Handle
Electric Starter Outlet
Primer