Switch On Or Off; Pair The Headset - Nokia BH-212 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BH-212_HS112W_EN_ES_PT_FRv2_9210666.book Page 5 Tuesday, October 21, 2008 11:53 AM
3. When the battery is fully charged, the green indicator light is displayed.
Disconnect the charger from the headset and the wall outlet.
If the headset was connected to your phone before charging, the headset connects
to it again.
The fully charged battery has power for up to 11 hours of talk time or up to 500 hours of
standby time.
When the battery is discharged, the headset beeps every minute and the red indicator
light flashes quickly.

Switch on or off

To switch on, press and hold the multifunction key for about 2 seconds. The headset beeps,
and the green indicator light is displayed. The headset tries to connect to a paired phone.
To switch off, press and hold the multifunction key for about 5 seconds. The headset
beeps, and the red indicator light is briefly displayed.

Pair the headset

1. Ensure that your phone is on and the headset is off.
2. Press and hold the multifunction key (for about 5 seconds) until the green indicator
light starts to flash quickly.
3. Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices.
4. Select the headset from the list of found devices.
5. Enter the passcode 0000 to pair and connect the headset to your phone. In some
phones, you may need to make the connection separately after pairing.
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido