Astralpool 66175 Manual De Instalación página 10

3.0 SETTINGS AND FUNCTIONALITY
3.1 INSTRUMENT DISPLAY
12:30
pH 7.20 pH
CL 1.50 ppm
ORP 750 mV
The right/left keys can be used to select display modes A and B
Note: Any unavailable chemical measurements will not be displayed.
Mode A
Line 1 = Time or relais status RT (relais duration) is active; system water flow status
Line 2 = pH measurement display; Temperature measurement display.
Line 3 = Chlorine display; Network connection through RS485 serial port (
Line 4 = ORP (Redox) display; Hold signal or OFA alarm flashing display, Available Alarms list display.
Mode B
Line 1 = pH dosing pump status, pH measurement display, Hold signal or OFA alarm flashing display.
Line 2 = Chlorine dosing pump status, Chlorine measurement display
Line 3 = ORP (Redox) dosing pump status, ORP (Redox) measurement display
Line 4 = Temperature relay status,Temperature measurement display; Available Alarms list display.
3.2 INSTRUMENT KEYBOARD
Esc/Mode = Dual function key
Esc= Exits the menu
Mode= Displays the measurement SetPoints (hold down for 3 seconds)
Cal = Accesses the calibration menu (hold down for 3 seconds)
Enter = Confirms the function, Displays the alarms list (hold down for 3 seconds)
Esc+Enter = Key combination for accessing the programming menu (hold down for 3 seconds)
Navigation keys= Up, Down, Right, Left for selecting parameters and navigating the menus
0000137242
A
FLOW ON
Tm 25.0°C
Hold
P ON
P ON
P OFF
R ON
A
Rev. 6.0
B
pH 7.40 pH
CL 0.80 ppm
ORP 700 mV
T 25.0°C
symbol)
Hold
A
8