Publicidad
Idiomas disponibles
Idiomas disponibles
To ensure this product is correctly installed and used appropriately, we highly advise you to
read this user guide very carefully.
1 . I N T R O D U C T I O N
Designed to be extremely efficient and user-friendly, R1 USB is the perfect AVR to protect
your sensitive electronic equipment.
2 . M A I N C H A R A C T E R I S T I C S
▪ Accepts wide input voltage range through boost and buck stabilizer
▪ Provides stable output voltage
▪ 3 FR/SCHUKO outlets
▪ 1 USB charger
▪ Provides over-/under-voltage protection
▪ Provides Over-temperature protection
▪ Compact size
▪ Wall mounting system
3 . S A F E T Y I N S T R U C T I O N S – S e c u r i t y
▪ Risk of Electric Shock:
The AVR unit uses potentially hazardous voltages. Do not attempt to disassemble this
equipment as it does not contain accessible components that can be repaired by users.
All repairs should be performed by qualified technicians only.
The utility power outlet shall be near the equipment and easily accessible. To isolate
the AVR from AC input, remove the plug from the utility power outlet.
Install the AVR in a temperature and humidity-controlled indoor area free of conductive
interference.
It should not be exposed to direct sunlight or sources of heat. Do not cover the
ventilation slots.
Disconnect the AVR from AC power before cleaning with a damp cloth (no cleaning
products).
In an emergency situation, switch the AVR to the "Off" position and disconnect the unit
from the AC power supply.
When the AVR is out of order, please refer to "section 9: trouble shooting" and call
the hot line.
▪ Connected products:
Make sure that the connected load does not exceed AVR capabilities. Do not leave any
recipients containing liquid on or near the AVR.
Do not plug the AVR input into its own output socket.
Do not plug the AVR into a power strip or surge suppressor.
The AVR has been designed for sensitive equipments. It should not be used with
equipment with inductive loads such as motors.
Do not connect any household appliances such as vacuum cleaners or life-support
systems to the AVR.
Due to excessive consumption, laser printers should not be connected to the AVR.
When use the voltage regulator with an Uninterruptible Power Supply (UPS), connect
the UPS to the output of this product, then connect the product to the wall outlet.
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 08 19 AA 59 205 06
User guide
9
Publicidad
