Installing Cup Holder (When Applicable); Aircraft Installation; Instruction Manual Storage - Harmony HMYFLDHBB-S3 Manual De Instrucciones

1. The cup holder can be installed on
either side of the booster seat.
2. Locate the opening in the end of
either armrest.
3. Insert cup holder clip into the
opening and push in until locked
into place. Ensure that the fabric
does not interfere with the
installation. If so, gently pull down on the fabric while
installing cup holder.
4. Pull out to remove.
This booster seat is NOT CERTIFIED for aircraft use.
Aircraft seats are not equipped with 3-point lap-and-
shoulder belts which are required for use with this
booster seat.

INSTRUCTION MANUAL STORAGE

Store your instruction manual in
the storage section provided in the
booster seat's backrest.
25
INSTALLING CUP HOLDER
(WHEN APPLICABLE)

AIRCRAFT INSTALLATION