Panel Configuration; Removing And Installing The Handles; Accessing The Service Module - Chauvet DJ Vivid 4X4 Manual De Instrucciones

8. Panel Configuration

Removing and Installing the Handles

The Vivid 4 comes with 2 handles that can be removed if desired.
1. Remove the modules from the panel as described in
2. From the front of the panel, remove the 2 screws securing the handle to the product with a
Phillips-head screwdriver.
3. Reinstall the modules.
4. Reverse the steps to re-install the handles.

Accessing the Service Module

The Vivid 4 service module can be accessed and serviced from the rear of the panel.
To access the Vivid 4 service module, remove the 4 screws indicated in the diagram below.
Use caution when removing these screws, as the cover of the service module will be
detached from the panel frame. All components in the service module are attached
to the cover.
21
Panel Configuration
LED Module Care and Replacement.
Vivid 4 X4 User Manual Rev. 3
Service
Module