Maintenance And Storage - Jimmy JV35 Manual De Usuario

UV Light Maintenance
Turn off the machine and unplug the power cord , wipe the UV light with dry cloths.
Notice: Turn off the machine and unplug the power cord before cleaning UV light in case of electric shock.

Maintenance and Storage

1. Please clean dust cup and filter after each use for further use. It is recommended to replace a
filter after 30-50 hours of working time(depending on specific situation) for better use.
2. Any paper, lead glass, plastic will greatly affect the effect of UV light. Please wipe and clean
the UV tube regularly for better use.
3.Do Not touch the UV tube as dirt will affect UV light effect.
4. Put the machine in cool and dry places if the machine is to be idled. Do Not leave it in direct
sunlight or humid environment.
Cautions
Please read this instruction manual carefully before use and keep it properly for future use.
Never leave the machine working without supervision.
Please turn off the power switch and unplug the power cord if the machine is to be idled. Do Not
unplug the power cord with humid hand in case of electric shock.
Cut the power source in maintenance or off-service.
Keep the power cord away from sharp objects and do not drag the cord to move the machine in
case of cord damage.
For safety reasons, please do not use the product to clean hot objects such as carbon, cigarette
butts, sharp objects such as broken glass, corrosive liquids, flammable and explosive materials
such as gasoline and alcohol. Otherwise it may cause product damage or fire.
Do not use this product to clean water or wet dust. Do Not operate it in humid places (such as
bathroom, toilet, laundry room, etc.) to avoid malfunction.
Do Not place the machine near heating appliances or expose it to direct sunlight in case of fire
hazard.
Keep this product beyond the reach of special individual such as children without adult's
supervision.
Do Not operate this machine with suction port blocked in case of product damage.
The product has UV light, for safety reasons, Do Not look at the bottom of the machine when
the power is on in case of ultraviolet rays harming.
Do Not apply this product to plants. Excessive use of UV may cause object damage.
Do Not sit on this product in case of personal injury and product damage.
Do Not remove the brushroll cover or force the cover outward when the machine is powered on
for safety reasons.
4