Recharging Nimh Batteries; Safety Warnings - Williams Sound Pocketalker 2.0 Manual Del Usuario

Internal T-Coil Switch and Indicator LED
Power "On"
Green LED
Right Side View:
Power On/Off
and
Volume Adjust
Rotary Dial
T-coil
Switch
Note: For best performance when using the T-coil feature, the
Pocketalker must be in a vertical orientation. This ensures the
best magnetic coupling to the loop system. When the T-coil
switch on the Pocketalker is enabled, the Pocketalker disables
the microphone input.

Recharging NiMH Batteries

BATTERY RECHARGING KITS MODEL BAT
KT8:

SAFETY WARNINGS

1. To prevent injury, never charge batteries when the Pocketalker 2.0 is in
2. To prevent injury, unplug the charger during lightning storms, or
Lanyard Slot
3. To prevent injury, be advised that different AC operating voltages
4. To prevent injury, use only the power supply provided by Williams
5. Do not use the power supply or cords if they have been damaged
6. Do not recharge the batteries for longer than 24 hours. After 24
12
Right Side
enclosed spaces such as handbags, cases, or other closed storage bags.
when charging is complete and the device is unused for 2 months or
more.
require the use of different types of wall outlet adapters. Check
the line voltage in your area and use the correct prong type.
Sound. Other power supplies may have similar specifications,
but may not be equivalent. Use of an unapproved power supply
may present a safety hazard or leave the device partially or
completely inoperable, and may void the warranty.
in any way.
hours, unplug the charger power supply from the wall outlet.
T-Coil Symbol
T-Coil "On" LED
T-Coil Switch
(in "On" position)
Charging LED
indicator
USB Micro-B
Charging Port
A544